![]() The slider is used to open and close the zipper’s teeth or chain. Teeth are made of brass, aluminum, nylon, or plastic. It is attached by sewing with the garments. It’s produced by cotton, polyester, nylon, or blended fiber. The suitable embodiment of the fastener elements is called zipper tape. It is a narrow fabric that has high lateral strength and may be knitted or woven, being so constructed as to provide at one selvage. Different Parts of Zipper with Their Function:Īll the above zipper’s parts have mentioned the below with their functions: 1. There are also some zippers which are provided with two sliders used for long coats or garments but especially used for the large suitcase. It is widely used for making the clothing of men, women, and children. This type of zippers is widely used for making the skirts of women. ![]() There are different type of zippers which are vastly used in the readymade garments sector are mentioned in the below: 1. Types of Zipper Used in Apparel Industry: The function of one zipper is different from another. It can be used for functional or decorative purposes. It is an essential part of garments that is widely used in the garments manufacturing sector. Here, the teeth are carried in two zip fastener tapes which run the length of the zip and which are usually stitched into apparel and other textile products. It is a fastening device operated using two parallel rows of plastic or metal teeth on either side of a closure that is interlocked by a sliding tab is called a zipper. Opens and closes from either front or back.Parts of Zipper with Their Functions What is the Zipper? The zipper opens and closes from either the front or back.(Automatic) ![]() Pins on the pull-tab work on the elements and lock. The lock automatically locks when no force is placed on the tab-pull. The pull-tab does not lock at any position on the body. Standard Slider Functions Non-Lock slider Measurement should be made from the top stop When the top stop does not enter the slider Rather than from the top end, measurement should be made from the shoulder inlet portion of the slider Same as the top tape extention end portionįrom the top end of the slider to the tip of the boxįrom the top end of the slider to the bottom end of the supplementary tape ![]() Zipper with double sliders (arranged in bottom-to- bottom relation)įrom the top end of one slider to the top end of the other slider Zipper with double sliders (arranged in head to head relation)įrom the tip of one bottom stop to the tip of the other bottom stopįrom the upper bottom stop to the tip of notches of the cut endįrom the tip of the bottom stop to the tip of notches of the cut end Types of Function Closed-end (C)įrom the top end of the slider to the tip of the bottom stopįrom the top stop to the tip of notches of the cut endįrom the top stop to the to the tip of notches of the cut end It is usually made of polyester, but depending on use, synthetic fiber tape, vinyl tape and cotton tape are also available. The tape is manufactured exclusively for zippers. When the left and the right side teeth are engaged they are called chain. The teeth, also known as elements, are the parts on each side of a zipper that mesh, or engage, with each other when passed through the slider. Various types of sliders are available depending on use. The slider joins or separates the elements when the zipper is opened or closed.
0 Comments
Leave a Reply. |